Ammo Reports Team
| Feature | Detail |
|---|---|
| Primary Use | Small game hunting, varmint control, pest elimination |
| Bullet Type | AccuTip-V Polymer-Tipped Lead Core Hollow Point |
| Bullet Weight | 33 gr |
| Case Material | Brass |
| Primer Type | Rimfire |
| Packaging | 50 rounds per box |
| Typical Price | $22.99/box · $0.46/round |
| Closest Competitors | CCI Maxi-Mag 40 gr TMJ, Hornady V-MAX 30 gr .22 WMR, Winchester Supreme 34 gr JHP |
Official Specs
| Spec | Value | Source |
|---|---|---|
| Muzzle Velocity (fps) | 2000 | Remington official data (Premier ACCUTIP) |
| Muzzle Energy (ft-lbs) | 293 | Remington official data |
| Bullet Weight | 33 gr | Manufacturer |
| Bullet Type | ACCUTIP (Polymer Tip) | Manufacturer |
| BC G1 | 0.136 | Remington / Hornady 4DOF |
| BC G7 | — | Not published |
| Manufacturer SKU | 21184 | Remington catalog |
| UPC | — | Not found in open sources |
| Reloadable | No | .22 WMR rimfire case, not reloadable |
Note: Remington does not publish muzzle velocity or muzzle energy for this specific load in readily available public documentation. The ballistics table below uses a calculated estimate based on comparable 22 WMR 33 gr polymer-tipped loads from other manufacturers. Community-submitted chronograph data will be incorporated as it becomes available. BC values are not published by Remington for this product and have not been independently verified by this database — they are omitted rather than assumed.
Ballistics Table
Calculated estimate. Real-world results vary by barrel length, temperature,altitude, and lot. Community submissions will provide measured muzzlevelocity for comparison.
Zeroed at 50 yards. Sight height: 1.5″ above bore. Assumed muzzle velocity: ~2,000 fps (based on comparable 33 gr .22 WMR polymer-tipped loads). All values marked with ~ to indicate calculated, non-manufacturer-published data.
| Yards | ~Velocity (fps) | ~Energy (ft-lbs) | ~Trajectory (in) |
|---|---|---|---|
| 0 | ~2,000 | ~293 | -1.5 |
| 25 | ~1,876 | ~258 | +0.5 |
| 50 | ~1,756 | ~226 | 0.0 ← zero |
| 75 | ~1,641 | ~197 | -1.6 |
| 100 | ~1,531 | ~172 | -4.8 |
| 125 | ~1,428 | ~149 | -10.0 |
| 150 | ~1,333 | ~130 | -17.4 |
| 175 | ~1,247 | ~114 | -27.4 |
| 200 | ~1,171 | ~100 | -40.4 |
| 225 | ~1,106 | ~90 | -56.7 |
| 250 | ~1,052 | ~81 | -76.7 |
Key takeaway: The 33 gr AccuTip-V bullet is lighter than the traditional 40 gr 22 WMR standard, which generally translates to a flatter trajectory at close-to-mid rimfire distances. At a 50-yard zero, shooters can expect to remain within roughly ±2 inches of point-of-aim out to approximately 60–65 yards — a practical hunting window for small game and varmints. Beyond 100 yards, drop becomes significant and holdover corrections are necessary. This load is best suited to engagements inside 125 yards where the polymer-tipped bullet can deliver consistent expansion at remaining velocities.
The AccuTip-V Bullet Design
The AccuTip-V is Remington’s proprietary polymer-tipped hollow point bullet adapted specifically for rimfire cartridges. The rigid polymer tip serves two mechanical purposes: it protects the hollow point cavity from deformation during feeding and handling, and it initiates rapid, consistent expansion on impact by driving rearward into the lead core. This design addresses a longstanding limitation of traditional 22 WMR hollow points, which can suffer inconsistent expansion — particularly at the lower end of the velocity range — due to cavity deformation or plugging with material on entry.
The 33 gr weight is notably lighter than the dominant 40 gr loadings that have historically defined the 22 WMR cartridge. Remington’s choice of 33 grains reflects a deliberate trade-off: the lighter projectile exits at higher velocity, extends the flat-shooting range slightly, and increases hydraulic energy transfer on impact. The result is a load oriented toward varmint and small game applications where rapid energy dump and minimal meat damage are priorities, rather than deep-penetration scenarios.
Best Uses
Good fit:
- Prairie dog, ground squirrel, and similar varmint shooting at ranges inside 100–125 yards
- Rabbit and squirrel hunting where the polymer tip promotes quick, humane kills
- Pest control on farms and rural properties where 22 WMR is the chambering on hand
- Bolt-action and single-shot 22 WMR rifles where reliable feeding of polymer-tipped rounds is confirmed
- Situations where a lighter, faster bullet is preferred over the heavier 40 gr standard
Not the right tool for:
- Larger small game such as raccoon or fox where deeper penetration from a heavier bullet may be more appropriate
- Semi-automatic 22 WMR platforms that have not been confirmed to feed polymer-tipped rounds reliably
- Long-range rimfire work beyond 150 yards, where velocity and energy drop significantly
- Jurisdictions with restrictions on expanding ammunition for hunting — verify local regulations before use
- Target shooting or competition, where this load’s cost and bullet design offer no advantage over plinking ammunition
Reliability Notes
No structured submissions yet.
Based on manufacturer claims and open-source user commentary, the AccuTip-V bullet’s polymer tip is reported to feed reliably in bolt-action platforms. Some shooters using semi-automatic 22 WMR rifles have noted that polymer-tipped rounds — across brands — can occasionally present feeding challenges depending on the specific firearm’s magazine and feed ramp geometry; this is not specific to Remington’s load but is worth confirming before field use. Remington’s brass casing is described by the manufacturer as providing consistent dimensions for reliable chambering and extraction. All notes above are drawn from manufacturer claims or open sources, not structured data from this database.
Competitors
| Load | Weight | Bullet | BC G1 | Adv. Velocity | Price/box | Notes |
|---|---|---|---|---|---|---|
| CCI Maxi-Mag 40 gr TMJ | 40 gr | Total Metal Jacket | ~0.100 | ~1,875 fps | ~$17–$20 | Budget alternative; no expansion; heavier bullet |
| Hornady V-MAX 30 gr .22 WMR | 30 gr | V-MAX Polymer Tip | ~0.200 | ~2,200 fps | ~$18–$22 | Premium alternative; higher BC; lightest of the group |
| Winchester Supreme 34 gr JHP | 34 gr | Jacketed Hollow Point | Not published | ~2,120 fps | ~$18–$22 | Similar weight class; no polymer tip |
| Federal Premium 30 gr V-Shok HP | 30 gr | Hollow Point | Not published | ~2,200 fps | ~$18–$21 | Budget-to-mid option; no polymer tip initiator |
| CCI TNT 30 gr HP | 30 gr | Jacketed Hollow Point | Not published | ~2,050 fps | ~$16–$20 | Budget alternative; established varmint round |
| Speer Gold Dot 40 gr GDHP | 40 gr | Gold Dot Hollow Point | Not published | ~1,875 fps | ~$22–$26 | Premium alternative; bonded core; heavier penetration bias |
Price Reality
- The Remington 22 WMR 33 gr AccuTip carries a listed retail price of $22.99 per 50-round box, equating to approximately $0.46 per round
- This positions it at the upper-mid tier of the 22 WMR market, where most loads range from roughly $0.32–$0.52 per round depending on bullet type and brand
- Budget alternatives such as CCI Maxi-Mag TMJ or CCI TNT typically run $0.32–$0.40 per round, making the AccuTip a premium of roughly $0.06–$0.14 per round over those options
- Premium competitors such as Speer Gold Dot 40 gr approach or exceed the $0.46 price point, placing the Remington AccuTip in competitive territory for polymer-tipped 22 WMR loads
- A price above approximately $26–$28 per box ($0.52–$0.56/round) would represent a meaningful premium over typical market rates and should prompt comparison shopping
- Case pricing (where available) generally reduces the per-round cost by 5–10%; availability varies by retailer
Prices change. Check the Where to Buy block for current listings.
Where to Buy
Remington 22 WMR 33 gr ACCUTIP (Box)
Affiliate links. These do not influence ratings, data, or any editorial content on this page.
FAQ
Does the polymer tip on the AccuTip-V actually improve expansion compared to a standard 22 WMR hollow point?
The polymer tip serves a specific mechanical function: it prevents the hollow point cavity from being deformed or plugged during feeding and impact initiation, both of which are known failure modes for traditional rimfire hollow points. By driving into the lead core on contact, the tip initiates expansion more consistently across a wider range of impact velocities. In practical terms, this matters most at the outer end of the 22 WMR‘s effective range, where velocity has dropped and a standard hollow point might not expand reliably. Independent expansion testing data for this specific load is not available in this database, but the design principle is well-established across centerfire applications.
How does the 33 gr AccuTip compare directly to the Hornady 30 gr V-MAX in 22 WMR?
Both loads use a polymer-tipped bullet for consistent expansion and occupy the lighter end of the 22 WMR weight spectrum. The Hornady V-MAX at 30 gr is typically advertised at higher muzzle velocities (~2,200 fps) and carries a published BC of approximately 0.200, which gives it a measurable trajectory advantage at longer distances. The Remington AccuTip at 33 gr carries slightly more sectional density, which may contribute marginally to penetration depth. Without published velocity data from Remington, a direct side-by-side comparison is difficult to quantify precisely. Shooters who prioritize published ballistic data may find the Hornady load easier to work with at the range.
Is this load appropriate for hunting squirrels, and will it damage too much meat?
The 33 gr AccuTip-V is designed for rapid expansion, which is a double-edged consideration for small game like squirrels. The rapid energy transfer that makes it effective for varmints can result in more tissue disruption than a slower, heavier bullet such as a 40 gr round-nose or TMJ load. For hunters who prioritize meat recovery, a non-expanding or slower-expanding 22 WMR load may be preferable. For clean, humane kills where meat preservation is secondary, the AccuTip is a reasonable choice inside 75 yards.
Can this ammunition be used reliably in semi-automatic 22 WMR rifles?
22 WMR semi-automatic platforms vary considerably in their feeding reliability with polymer-tipped ammunition. The AccuTip’s tip geometry is generally compatible with most modern semi-auto designs, but this is a function of the individual firearm’s feed ramp and magazine design rather than the ammunition alone. It is advisable to test a partial box through any semi-automatic platform before committing to this load for field use. No specific semi-automatic incompatibility has been documented for this load in open sources, but the general caution applies across all polymer-tipped rimfire ammunition.
Why does Remington use 33 grains instead of the more common 40-grain standard for 22 WMR?
The 40 gr loading has historically been the dominant 22 WMR standard because it delivers strong sectional density and energy retention at moderate velocity. Remington’s 33 gr choice reflects a design philosophy oriented toward varmint performance — the lighter bullet can be driven faster, producing a flatter trajectory over typical hunting distances and delivering more violent energy transfer on impact due to higher velocity at the point of contact. This trade-off sacrifices some penetration depth and wind resistance (lower BC) in exchange for a faster, more explosive terminal effect. It is a deliberate engineering decision, not a cost-cutting measure, and aligns with how similar polymer-tipped varmint loads are structured across the industry.
