Hornady Match 338 Lapua Magnum 250 Grain BTHP
Ammo Reports Team
| Official Spec | Value |
|---|---|
| Manufacturer | Hornady |
| Cartridge | 338 Lapua Magnum |
| Product Line | Match |
| Bullet Name / Bullet Type | BTHP Match |
| Bullet Weight | 250 gr |
| Manufacturer SKU | 8230 |
| UPC | Not found |
| Rounds per Box | 20 |
| Muzzle Velocity | 2850 fps |
| Muzzle Energy | 4509 ft-lb |
| Ballistic Coefficient G1 | 0.670 |
| Ballistic Coefficient G7 | Not found |
| Case Material | Brass |
| Primer | Not found |
| Reloadable | Not found |
| Test Barrel Length | 24 in |
| Zero Distance | 100 yd |
| Sight Height | 1.5 in |
| Intended Use | Target shooting / match competition |
| Product Status | Listed by manufacturer; production status not independently confirmed |
| Closest Competitors | Federal Premium Gold Medal 338 Lapua 250 gr Sierra MatchKing; Lapua Scenar 338 Lapua 250 gr OTM; Sellier & Bellot 338 Lapua 250 gr HPBT (comparison identities/specifications require individual verification) |
Data is based on official manufacturer sources. Found an error? Send us the source link.
Verification note: Reference: Hornady 2024 LE/Military catalog, item 8230. This archived data set is retained intact; later catalog data may differ. No independent AmmoReports firing test is recorded.
Ballistics Table
Manufacturer-published reference. Zero: 100 yd. Sight height: 1.5 in. Test barrel: 24 in. Only verified published rows are shown. No interpolated distances or independently calculated trajectories are included.
| Distance (yd) | Velocity (fps) | Energy (ft-lb) | Drop (in) |
|---|---|---|---|
| 0 | 2850 | 4509 | -1.5 |
| 100 | 2712 | 4083 | 0 |
| 200 | 2579 | 3691 | -3.2 |
| 300 | 2449 | 3330 | -11.7 |
| 400 | 2323 | 2996 | -26 |
| 500 | 2201 | 2689 | -46.7 |
Key takeaway: These are factory reference figures for this exact match load, not an AmmoReports accuracy test. Actual velocity and point of impact depend on the rifle, ammunition lot and conditions. Confirm the rifle’s zero and measured performance before relying on a trajectory.
The BTHP Match Bullet in Context
The 250 gr BTHP Match is a boat-tail hollow-point projectile intended for precision target shooting. The open tip of a match bullet should not be treated as evidence of controlled hunting expansion. Hornady identifies the loaded ammunition as 8230.
Published velocity and BC provide reference data for this factory load. They do not establish a guaranteed group size in an individual rifle. Compare accuracy and velocity using consistent conditions and recorded ammunition lot numbers.
Best Uses
Good fit:
- Range practice and match competition with a rifle chambered for this exact cartridge.
- Comparing factory ammunition in the same rifle while recording group size, velocity, lot number and conditions.
- Shooters evaluating factory match ammunition before selecting a consistent supply.
Limitations:
- A match bullet is not automatically a controlled-expansion hunting bullet.
- Factory test-barrel results may differ from an individual rifle. A fixed velocity loss per inch is not assumed.
- This page does not establish lead-free certification for the exact product.
Reliability Notes
No structured AmmoReports firing-test submissions are recorded in this article. Manufacturer reference data must be kept separate from independent chronograph, accuracy and terminal-performance tests. No unverified forum consensus, accuracy guarantee, case-life estimate or claim of recall-free status is presented as a measured result.
Competitors
| Load / reference name | Listed weight | Listed bullet | Verification |
|---|---|---|---|
| Federal Gold Medal 338 Lapua 250 gr | 250 gr | Sierra MatchKing BTHP | Identity and comparative specifications not verified |
| Lapua Scenar 338 Lapua 250 gr | 250 gr | Scenar OTM | Identity and comparative specifications not verified |
| Sellier & Bellot 338 Lapua 250 gr HPBT | 250 gr | HPBT | Identity and comparative specifications not verified |
| Nosler Trophy Grade 338 Lapua 225 gr | 225 gr | AccuBond | Identity and comparative specifications not verified |
| Black Hills 338 Lapua 250 gr | 250 gr | Sierra MatchKing | Identity and comparative specifications not verified |
| Norma Golden Target 338 Lapua 250 gr | 250 gr | Norma Golden Target HPBT | Identity and comparative specifications not verified |
The original comparison list is retained for identification and follow-up. Listed names, weights and projectile labels are not independently confirmed product records. Unverified BC, velocity, price and performance claims have been removed. A handload reference, if listed, is not a factory-ammunition equivalent.
Price Reality
Compare the exact cartridge, projectile, weight, SKU and package quantity before comparing offers. Box and case listings can use different UPCs. Cost per round should be calculated from a current store offer, including shipping and applicable taxes. No undated retail-price benchmark or current-stock claim is asserted here.
Where to Buy
Affiliate links. These do not influence ratings, data, or editorial content.
FAQ
What exact factory load does this page cover?
Hornady Match, 338 Lapua Magnum, 250 gr BTHP Match. Manufacturer identifier: 8230.
Are the ballistic figures manufacturer data or an independent test?
The table reproduces verified manufacturer-published reference values. It is not an AmmoReports firing test. Published distances are retained without interpolation.
Is this an expanding hunting bullet or a match projectile?
This is a match-oriented projectile. A hollow point or open tip used in match construction does not establish reliable controlled expansion on game.
Will a different barrel produce the published velocity?
Factory velocity is a reference for the stated test conditions. Barrel, chamber, ammunition lot and temperature can change the result. Measure the actual rifle; no fixed loss or gain per inch is guaranteed.
Can other magnum cartridges be substituted?
Use only the exact chambering specified by the firearm manufacturer. 338 Lapua Magnum is a distinct cartridge; a similar caliber name, bullet diameter or magnum designation does not establish interchangeability.
