Federal 6.5 Creedmoor 135 Gr Berger Hybrid Hunter
| Official Spec | Value |
|---|---|
| Manufacturer | Federal Ammunition |
| Cartridge | 6.5 Creedmoor |
| Product Line | Berger Hybrid Hunter |
| Bullet Name / Bullet Type | Berger Hybrid |
| Bullet Weight | 135 gr |
| SKU / Part Number / Item Number | P65CRDBCH1 |
| UPC | 604544649284 |
| Rounds per Box | 20 |
| Muzzle Velocity | 2,775 fps |
| Muzzle Energy | 2,308 ft-lb |
| Ballistic Coefficient G1 | 0.584 |
| Ballistic Coefficient G7 | 0.303 |
| Case Material | Nickel-plated brass |
| Primer | Not found |
| Reloadable | Not found |
| Test Barrel Length | Not found |
| Zero Distance | 200 yd |
| Sight Height | 1.5 in |
| Intended Use | Big Game; Long Range |
| Product Status | Current |
| Closest Competitors | Hornady Precision Hunter 6.5 Creedmoor 143 gr ELD-X; Hornady Match 6.5 Creedmoor 140 gr ELD Match; Federal Gold Medal Berger 6.5 Creedmoor 130 gr Hybrid OTM; Berger Hybrid Hunter 6.5 Creedmoor 140 gr; Barnes Precision Match 6.5 Creedmoor 140 gr OTM BT; Nosler Trophy Grade 6.5 Creedmoor 140 gr AccuBond |
Data is based on official manufacturer sources. Found an error? Send us the source link.
Product identity and ballistics were verified against Federal’s current exact-SKU product data. UPC was confirmed through an exact-SKU retail listing.
Affiliate links. These do not influence ratings, data, or editorial content on this page.
Official Ballistics
Federal publishes velocity, energy, and 10 mph crosswind drift for this exact load at 100-yard intervals. These are manufacturer-published values.
| Distance (yd) | Velocity (fps) | Energy (ft-lb) | 10 mph Wind Drift (in) |
|---|---|---|---|
| 0 | 2,775 | 2,308 | 0.0 |
| 100 | 2,620 | 2,057 | 0.6 |
| 200 | 2,469 | 1,828 | 2.3 |
| 300 | 2,324 | 1,619 | 5.3 |
| 400 | 2,184 | 1,430 | 9.8 |
| 500 | 2,049 | 1,258 | 15.7 |
Official Long-Range Trajectory
Federal’s long-range trajectory uses a 200-yard zero and sights 1.5 inches above the bore.
| Distance (yd) | Trajectory (in) |
|---|---|
| 50 | +0.7 |
| 100 | +1.8 |
| 200 | 0.0 |
| 300 | -7.5 |
| 400 | -21.5 |
| 500 | -42.7 |
Product Overview
Federal Premium Berger Hybrid Hunter uses Berger’s 135 gr Hybrid hunting bullet with a tangent-secant ogive. Federal loads it in nickel-plated brass with specialized propellant and positions it for accurate medium- and big-game hunting.
Best Uses
- Medium- and big-game hunting
- Long-range hunting where a high-BC hunting bullet is appropriate
- Factory rifles that shoot the 135 gr Berger Hybrid accurately
Reliability Notes
- Federal publishes a 1,800 fps terminal-performance minimum for this exact load.
- The official long-range trajectory uses a 200-yard zero and 1.5-inch sight height.
- The Berger Hybrid Hunter is a hunting bullet, not the same product as Berger Hybrid Target or OTM match ammunition.
Competitors
| Load | Bullet | Comparison |
|---|---|---|
| Hornady Precision Hunter 6.5 Creedmoor 143 gr ELD-X | 143 gr ELD-X | High-BC hunting alternative |
| Hornady Match 6.5 Creedmoor 140 gr ELD Match | 140 gr ELD Match | Match load, not a hunting-bullet equivalent |
| Federal Gold Medal Berger 6.5 Creedmoor 130 gr Hybrid OTM | 130 gr Hybrid OTM | Federal match alternative |
| Berger Hybrid Hunter 6.5 Creedmoor 140 gr | 140 gr Hybrid Hunter | Heavier same-family hunting alternative |
| Barnes Precision Match 6.5 Creedmoor 140 gr OTM BT | 140 gr OTM BT | Match load, not a hunting-bullet equivalent |
| Nosler Trophy Grade 6.5 Creedmoor 140 gr AccuBond | 140 gr AccuBond | Bonded hunting alternative |
FAQ
What makes the Berger Hybrid Hunter bullet different from a standard VLD hunting bullet?
The Berger Hybrid Hunter uses a combined tangent-secant ogive rather than the pure secant ogive found on Berger’s VLD line. This matters practically because pure VLD bullets are sensitive to seating depth and can be finicky when fed from box magazines in hunting rifles. The Hybrid design’s tangent section near the base of the ogive reduces that seating-depth sensitivity, making factory-loaded ammunition more reliable across different chamber dimensions. The secant section higher on the ogive still delivers the low-drag aerodynamic profile that gives the bullet its long-range performance advantage. Terminal performance is designed to be consistent across a broader velocity range than traditional VLD hunting bullets.
Is this load appropriate for elk hunting?
This is a legitimate question with a nuanced answer. The 135 gr Berger Hybrid Hunter is designed for rapid expansion, which produces excellent performance on deer-sized game but may not deliver the deep, controlled penetration preferred for elk, especially on quartering-away or heavy-shoulder shots. Berger and Federal position this bullet for deer, antelope, and similar medium game. For elk, most experienced hunters prefer a bonded-core bullet — such as the Nosler AccuBond or Federal Trophy Bonded Tip — that retains more weight and penetrates more deeply through heavy muscle and bone. If this is your only available load for an elk hunt, shot placement discipline becomes especially important.
How does this load compare to the Hornady Precision Hunter 143 gr ELD-X in the field?
Both loads represent the current generation of high-BC hunting bullets designed for flat trajectories and reliable terminal performance. The Hornady ELD-X at 143 gr carries more sectional density and is a bonded-style bullet with a heat-shielded polymer tip, which gives it a slight edge on retained weight and penetration depth. The Berger Hybrid Hunter at 135 gr has a slightly higher velocity potential from the same barrel and a very competitive BC. In practical hunting situations inside 400 yards on deer-sized game, the real-world difference in terminal outcome is likely negligible. The Hornady option is meaningfully less expensive, which matters for shooters who want to practice with the same load they hunt with.
Can this ammunition be used in 6.5 Creedmoor rifles with shorter barrels, such as 18″ or 20″ hunting carbines?
Yes, but with an important caveat. The Berger Hybrid Hunter bullet is designed to expand reliably across a range of impact velocities, but a shorter barrel will reduce muzzle velocity — typically 25–35 fps per inch lost compared to a 24″ test barrel. A rifle with an 18″ barrel may launch this bullet at approximately 2,650–2,700 fps rather than the estimated 2,800 fps from a full-length barrel. At shorter hunting ranges (under 200 yards), this has minimal effect. At 400+ yards, the lower starting velocity means the bullet arrives at the target with less retained velocity, which could affect expansion reliability at the margins. For carbine-length rifles used primarily inside 300 yards, this load remains a sound choice.
Is this load legal for hunting in states or jurisdictions with lead-free ammunition requirements?
No. The 135 gr Berger Hybrid Hunter is a conventional lead-core, jacketed bullet and does not meet lead-free requirements in jurisdictions such as California, where non-lead ammunition is mandated for hunting. Hunters in those areas should look at copper or copper-alloy monolithic bullets such as those offered by Barnes (TSX, LRX) or Federal’s own Trophy Copper line. Always verify local regulations before selecting a hunting load, as requirements vary by state, zone, and sometimes by species.
Submit Your Data · Real-World Results
Manufacturer velocity figures are measured under controlled lab conditions – barrel length, temperature, and lot number all affect real-world performance. The data below comes from community submissions tied to specific test conditions and reviewed before publishing.
Once this page reaches 3 approved submissions, aggregate velocity and confidence level will appear here automatically.
You need to login first.Results vary by firearm, barrel condition, ammunition lot, and environmental factors. Submitted data is for reference only. AmmoReports does not guarantee accuracy of user-submitted results.


