Ammo Reports Team
| Feature | Detail |
|---|---|
| Primary Use | Long-range target shooting and competition |
| Bullet Type | Berger Open Tip Match |
| Bullet Weight | 140 grain |
| Case Material | Brass |
| Primer Type | Boxer (Large Rifle, Remington No. 9½) |
| Packaging | 20 rounds per box (standard; confirm at point of sale) |
| Typical Price | $51.99/box · $2.60/round |
| Closest Competitors | Hornady Match 6.5 PRC 147 gr ELD-M · Federal Gold Medal 6.5 PRC 130 gr Berger Hybrid · Lapua Scenar-L 6.5 PRC 136 gr OT |
Component identification: case material and Boxer system are cross-checked against exact-product listings. Official Specs below separately identifies what is verified in manufacturer sources; unconfirmed primer sizes are not inferred from the cartridge name.
Official Specs
| Spec | Value | Source |
|---|---|---|
| Manufacturer | Remington | Remington product specifications |
| Cartridge | 6.5 PRC | Remington product specifications |
| Muzzle Velocity (fps) | 2925 | Remington product specifications |
| Muzzle Energy (ft-lbs) | 2659 | Remington product specifications |
| Bullet Weight | 140 gr | Remington product specifications |
| Bullet Type | Berger Open Tip Match | Remington product specifications |
| BC G1 | 0.607 | Remington product specifications |
| BC G7 | – | Not found in verified official manufacturer sources |
| Manufacturer SKU | 27673 | Remington product specifications |
| UPC | 047700497907 | Remington product GTIN |
| Case Material | – | Not found in verified official manufacturer sources |
| Primer | Remington No. 9½ (Large Rifle) | Remington 2024 catalog; primer designation |
| Reloadable | – | Not found in verified official manufacturer sources |
Official figures identify Remington Premier Match 6.5 PRC 140 gr Berger OTM, item 27673. A dash means not found in verified official manufacturer sources. Calculated values appear only in the separately labeled extended ballistics table.
Official figures identify Remington Premier Match 6.5 PRC 140 gr Berger OTM, item 27673. A dash means not found in verified official manufacturer sources. Calculated values appear only in the separately labeled extended ballistics table.
Manufacturer: Remington. Detailed source records are retained in the editorial verification log.
Ballistics Table
Official manufacturer data for 27673. Trajectory uses a 200-yard zero and 1.5-inch sight height. The factory table ends at 500 yards.
Official manufacturer data for 27673. Trajectory uses a 200-yard zero and 1.5-inch sight height. The factory table ends at 500 yards.
| Yards | Velocity (fps) | Energy (ft-lbs) | Trajectory (in) |
|---|---|---|---|
| Muzzle | 2925 | 2659 | -1.5 |
| 100 | 2770 | 2386 | 1.5 |
| 200 | 2621 | 2135 | 0.0 |
| 300 | 2476 | 1906 | -6.6 |
| 400 | 2336 | 1696 | -18.7 |
| 500 | 2201 | 1506 | -37.5 |
Key takeaway: Use the official figures to identify the factory load. The extended calculation below provides a separate comparison to 1000 yards; it does not establish an effective hunting range or replace measured rifle data.
Calculated comparison – not manufacturer data: Muzzle to 1000 yd in 100-yd steps. Inputs: 2925 fps, 140 gr, G1 BC 0.607; 200-yd zero; sight height 1.5 in. Assumed atmosphere: 59°F, 29.92 inHg station pressure, sea level, 0% humidity; level fire, no wind. Point-mass G1 calculation with py-ballisticcalc 2.3.1; spin drift and Coriolis are not included. Differences from factory rows reflect model and condition differences.
| Yards | Calculated velocity (fps) | Calculated energy (ft-lbs) | Calculated trajectory (in) |
|---|---|---|---|
| Muzzle | 2925 | 2659 | -1.5 |
| 100 | 2768 | 2381 | 1.5 |
| 200 | 2616 | 2127 | -0.0 |
| 300 | 2469 | 1895 | -6.6 |
| 400 | 2327 | 1683 | -18.9 |
| 500 | 2190 | 1490 | -37.7 |
| 600 | 2057 | 1315 | -63.7 |
| 700 | 1929 | 1157 | -97.9 |
| 800 | 1806 | 1014 | -141.5 |
| 900 | 1689 | 887 | -195.7 |
| 1000 | 1578 | 774 | -262.2 |
The Berger OTM Bullet in Factory Ammunition
Remington loads a 140 gr Berger Open Tip Match bullet in Premier Match item 27673. The manufacturer classifies this ammunition for long-range target shooting and publishes G1 BC 0.607. The OTM name describes a match design; it should not be treated as evidence of controlled hunting expansion.
Remington’s decision to partner with Berger Bullets for the Premier line places this load in a specific niche: it is loaded to match-grade consistency standards but is also marketed for hunting applications where flat trajectory and high BC matter more than controlled expansion. Several U.S. jurisdictions classify Berger OTM bullets as legal for hunting use, but shooters should verify local regulations before using this load for game. The 6.5 PRC case provides enough powder capacity to push the 140 grain Berger to velocities that maximize its long-range BC advantage over shorter, lighter alternatives in the 6.5mm family.
Best Uses
Good fit:
- Long-range precision rifle competitions (PRS, NRL) where match-grade consistency and high BC are prioritized
- Precision target shooting where consistent factory ammunition is needed
- Comparing factory-load accuracy and measured velocity in a rifle chambered for 6.5 PRC
- Shooters seeking a dedicated target load rather than a controlled-expansion hunting bullet
Not the right tool for:
- Hunting applications that require a purpose-built expanding bullet
- Large or dangerous game where deep penetration and controlled expansion from a bonded or partition bullet are required
- Budget-conscious shooters doing high-volume practice — at $2.60/round, this load is priced for precision work, not range training
- Treating a factory velocity or table as measured performance from a different barrel length
Reliability Notes
No structured submissions yet.
Based on manufacturer claims and open-source information, the Remington Premier line applies tighter-than-standard tolerances on powder charge weight, bullet seating depth, and case preparation — practices consistent with other premium match ammunition manufacturers. The use of Berger projectiles sourced directly from Berger Bullets suggests component consistency is maintained at the bullet level, as Berger is known for tight jacket concentricity standards. No lot-specific accuracy guarantees have been published for this load, and no independent laboratory data is currently available to confirm claimed consistency levels. Anecdotal reports from precision rifle forums indicate sub-MOA performance from 24-inch barrels in factory 6.5 PRC rifles, but these reports come from open sources and have not been submitted through structured testing protocols.
Competitors
| Load | Weight | Bullet | BC G1 | Advertised Velocity | Price/box | Notes |
|---|---|---|---|---|---|---|
| Hornady Match 6.5 PRC 147 gr ELD-M | 147 gr | ELD-M | 0.697 | 2,930 fps | ~$38-$45 | Budget alternative; widely available; different bullet design |
| Federal Gold Medal 6.5 PRC 130 gr Berger Hybrid | 130 gr | Berger Hybrid OTM | ~0.530 G1 | 2,875 fps | ~$48-$55 | Same manufacturer bullet family; lighter weight |
| Lapua Scenar-L 6.5×47 (not PRC) | 136 gr | Scenar-L OT | ~0.615 G1 | Varies | ~$55-$65 | Different cartridge; premium alternative for comparison only |
| Nosler Match Grade 6.5 PRC 140 gr RDF | 140 gr | RDF (Reduced Drag Factor) | 0.650 | 2,910 fps | ~$50-$58 | Same weight class; competing high-BC design |
| HSM Trophy Gold 6.5 PRC 140 gr Berger VLD | 140 gr | Berger VLD Hunting | ~0.612 G1 | ~2,950 fps | ~$44-$52 | Uses Berger bullet; hunting-oriented variant |
| Black Hills Gold 6.5 PRC 147 gr ELD-M | 147 gr | ELD-M | 0.697 | 2,835 fps | ~$55-$62 | Premium alternative; heavier bullet, lower velocity |
Price Reality
- Typical retail: $49.99–$54.99 per 20-round box; case pricing not widely published for this load
- Per-round cost: approximately $2.50–$2.75 depending on retailer and promotional pricing
- The Hornady Match 147 gr ELD-M is the most direct budget comparison at roughly $38–$45 per box, offering proven match performance at a meaningfully lower per-round cost
- Federal Gold Medal with Berger Hybrid projectiles sits in a similar price tier to the Remington Premier, making the choice between them primarily a bullet-design preference rather than a cost decision
- Fair price benchmark: anything above $58 per box for this load should be scrutinized — at that price point, imported premium options from Lapua or RWS enter the conversation
- Significant price inflation above MSRP (more than 15%) is not justified by the load’s specifications relative to competitors
Prices change. Check the Where to Buy block for current listings.
Where to Buy
Affiliate links. These do not influence ratings, data, or any editorial content on this page.
FAQ
Is this a purpose-built hunting load?
Remington classifies 27673 as Premier Match ammunition for long-range target shooting. The Berger OTM designation does not establish controlled expansion or suitability for hunting. Select a purpose-built hunting load for that application.
How does this load compare to the Hornady Match 147 gr ELD-M in 6.5 PRC?
The two loads represent different engineering philosophies at similar price points. The Hornady 147 gr ELD-M uses a heat shield tip to preserve BC at long range and is optimized for long-range target shooting, while the Berger 140 gr OTM in this Remington load is a slightly lighter, tip-open design with a strong competition pedigree. The 147 gr ELD-M has a published G1 BC of 0.697, which is higher than the Berger 140 OTM’s typical G1 figure, giving it a marginal wind-bucking advantage at extreme distances. However, the Berger bullet’s reputation for lot-to-lot consistency is a meaningful factor for shooters who prioritize predictable performance across different production runs.
What barrel length is this load optimized for?
The official product page lists 2925 fps. A SKU-specific test-barrel length was not verified in the sources checked. No fixed velocity loss per inch is assumed; actual velocity depends on the rifle and ammunition lot.
Can this ammunition be used in a 6.5 Creedmoor rifle?
No. The 6.5 PRC and 6.5 Creedmoor are distinct cartridges with different case dimensions and operating pressures. The 6.5 PRC operates at higher pressure (65,000 PSI vs. 62,000 PSI for 6.5 CM) and has a larger case body. Attempting to chamber 6.5 PRC ammunition in a 6.5 Creedmoor rifle is unsafe and physically unlikely to succeed due to headspace differences, but the warning is worth stating explicitly because the two cartridges share the same bullet diameter and are often discussed together. Always verify the chamber marking on your rifle before purchasing ammunition.
Is Remington Premier match ammunition reloadable?
Yes, with the standard caveats that apply to any factory brass. The Remington Premier line uses brass cases with Boxer primers, meaning spent cases can be resized, reprimed, and reloaded using standard reloading equipment. However, this page covers factory ammunition only and does not provide reloading data. Brass from premium factory loads like this one is generally considered good-quality starting material, but case life and consistency after multiple firings depend on the specific rifle’s chamber dimensions and the reloader’s preparation practices.
